半自動吹瓶機適合吹制各種形狀的PET瓶，容積從20毫升到2000毫升，此吹瓶機廣泛應用與吹制礦泉水瓶、碳酸飲料瓶、可樂瓶等。
1、采用新型的雙曲臂四拉杠合模結構，十字架平衡固定滑動。
2、封口、拉伸采用雙杠聯體設計，合二為一，有利于產品成型。
3、*的氣路設計，單路、雙路進氣均可；低壓力機械合模、封口、拉
伸；高壓力吹瓶成型。
4、微電腦自動控制器, 操作方便。
5、瓶坯用紅外線加熱，可控恒壓控制，變頻調速，從而達到吹制精
度。
This machine is suit for the all the kinds PET bottles, the volume form 20ml to 2000ml. Also be applied to blow the mineral water,carbonated drink bottle and coca cola bottle:
1. adopting the new structure of double- bend rod and four pulling rod to close,the
cross could move in balance and fixed
2. Sealing, stretching adopt double rods design, join two part in one
body,conducive the product forming
3. Advance air path design,the single and double paths both could enter theair,low
Pressure to close the mould ,sealing and stretching ,the high pressure to form
4. Use the PLC to control, the mini computer is easy for operating
5. Infrared heating, could be controlled by the permanent pressure, so as to get
the Best precision
BM
BLOW MOLDING MACHINE
